PORSCHE 924S AS AIR FILTER
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
High performance drop-in replacement for the factory air filter; fits OEM 957 s/ GTS airbox for improved airflow and performance.
Features:
Fits all Porsche 957 Cayenne s/ GTS vehicles (2008-2010)
Lifetime filter is washable and re-oilable
Original equipment for the ferrari formula 1 team and ferrari GT race team, as well as Porsche motorsports, mercedes benz f1 and GT race teams, and the audi motorsports team
General Fitment CAYENNE 2007-10
$3,548.14
Make a selection
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Brombacher 997 tt stainless steel race pipes
Facts:
- + 35 crank hp & + 25 crank torque
- 3" tubing (75mm) that tapers down to 2.25" (57mm) to prevent turbo damage.
- weighs 7 lbs. (3,1 kg)
- t 316 stainless steel for improved durability over t 304.
- bolts up to the turbochargers, replacing both the cats and the muffler.
- reduces turbo lag and backpressure.
- exhaust tips are not included! Stock tips will fit.
- intoxicating growl at idle, partial throttle and wide open throttle.
- made in Germany
- programming or o2 sensor simulators are necessary, as the lack of catalytic converters will throw the check engine light. (see part numbers below)
Figures:
Genuine:
Engine - 6 cylinder...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $456.50
Make a selection
Schnell cold air intake Porsche 996 98-04
Increase your airflow and horsepower in a few easy steps. Schnells 4 ply, silicone hose will allow for much better airflow while still protecting your air box from costly backfires, unlike the competition. The silicone material does not retain heat which can rob your engine of valuable horsepower. This intake installs in less then 15 minute. A cinch for any skill level. Our introductory sale price is also 35% less then anything else on the market. We also recommend installing the K&N air filter element for even more airflow & horsepower.
Features:
-better throttle response
-quicker acceleration
-more aggressive intake note
-installs in 15 minute...(choose a part on the right to read more)
General Fitment 911 1998-05
A less restrictive, high performance cotton sport air filter. Bmc filters deliver over 150% better air flow than stock paper air filters.
Lifetime filter element requires no replacement and minimal service.
Consider also:
Bmc cleaning kit
Part-470 500 355
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 930 1975-77 911 1984-86 911 1987-89 911 1989-94
The ultimate in cooling efficiency. The stacked-plate design offers maximum cooling with almost bulletproof strength. Aircraft quality aluminum, flux-less oven brazed construction. Cross-path airflow effectively cools oil as air passes through as many as 16 paths across sturdy embossed plates. Insignificant pressure drop, twice the cooling in half the size! Painted black for fast heat dissipation. Complete kits includes cooler, sandwich adapter with 3/4" x 16 nipple, remote filter bracket, high temperature hose and all fittings required for installation on your 914 or 912e. The sandwich adapter fits between stock oil filter mount and oil filter.
285x215x30mm. We recommend that you also use a fan with this coo...(choose a part on the right to read more)
General Fitment 912 1965-69 914 1970-76
The 57 series generation ii air intake, also referred to as an fipk, is K&N's ultimate performance product. These performance intakes are designed to increase power by as much as 10%. 57 series fipk's are carb exempt, street legal in all 50 us states, come with K&N's million mile limited warranty and are guaranteed to increase power.
K&N air intake systems replace your vehicle's restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This translates into more power and torque for your vehicle. The air filters on these kits are washable and reusable. Most of our air intake systems are easy to insta...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
Left or right; intake tube to air filter housing
View/Change Diagram
From $120.00
Make a selection
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
View/Change Diagram
From $23.00
Make a selection
On the 997.1 GT3 / rs, air gets diffused and creates lots of turbulence. This genuine motorsport cup ram air spoiler, reduces turbulence and channels more air into the intake above 65 mph. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 GT3 2007-11
From $415.80
Make a selection
Washable. 2 required. All 914-6 models and 73-76 914s need new air filters; we make it easy with these fresh German replacements. Way too many air filter assemblies were fitted to dual and single carb kits. Who knows what is on yours? Straighten it out with our permanent, washable air filters and highly chromed frames. Nothing looks better in a carbureted engine bay than a pair or a single shiny new air filter assembly.
General Fitment 914 1970-76
Continuing on our modification path for the Porsche 997.2 turbo, agency power has just finished and released their new carbon fiber cold air intake kit. the carbon fiber airbox is a direct replacement for the OEM intake box. the airbox is made using a prepreg process which allows the entire airbox to be flawless from pulls. similar in shape to the OEM box for fitment, this carbon fiber unit features enlarged holes to fit dual K&N cone air filters. the 2x2 weave is finished in a gloss clear coat and sits nicely where the standard plastic box once was. These filters are pressed in through the rear of the intake box utilizing the rubber seal on the filter as a secure fit.
Each filter mates up to the factory...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,500.95
Make a selection
"brombacher" 996 tt (sound version) stainless steel exhaust system
Facts:
- + 30 crank hp & + 22 crank torque
- catalytic bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5"(90mm/80mm) tips and are made for this muffler. Kindly order bes 996 060 41s sep...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$2,873.20
Make a selection
"brombacher" 996 GT2 (lightweight version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- 4 x 3.5"(90mm/80mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power -...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,230.60
Make a selection
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5"(90mm/80mm) tips and are made for this muffler. Kindly order bes 996 060 41s separately.
Figures:
Gen...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,947.80
Make a selection
"brombacher" 996 GT2 titanium exhaust system with 200 cells titanium tri-metal catalytics.
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 60...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$9,835.10
Make a selection
Brombacher (sound version) stainless steel mufflers
Facts (based on 997s):
- + 5 crank hp & + 2 crank torque
- 2 1/2 (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 33 lbs. (15,0 kg)
- t 316 stainless steel for improved durability over t 304
- factory stamped for true Porsche sound
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- reuses factory tips or any aftermarket tip designed to fit OEM exhaust. (3.6l mod. Need 3.8l tips)
- no dme programming necessary
Figures (based on 997s):
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 440...(choose a part on the right to read more)
General Fitment 911 2009-12
$2,581.70
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|